Aligning the Front to the Rear of the Vehicle

The rear of pickup trucks equipped with a factory suspension kit is set higher than the front. Take care of your vehicle's appearance without sacrificing ride quality. The strut spacers come with there own set of high tensile strut bolts that are press-fitted into place, these bolts bolt to your body and your strut will bolt directly to the machined holes in the strut spacer body to ensure a perfect fit. The Strut Spacer is approximately 25mm high, but will raise the vehicle approximately 45-50mm above the axle. Strut Spacers are made from high quality aluminum.

Specifications:

    Aligns the front with the rear of the vehicle
    Increases ground clearance
    Maintains factory ride quality
    Made from high quality aluminum
    Easy to install

Included in box:

    (2) Front strut extensions

Notes:

    It is only recommended to use strut spacers on standard length struts, if you are using longer struts (aftermarket) then you will need to check down travel, make sure the CV's do not bind and there are no fouling issues with steering components and no steering components move past there maximum working angles.
    Some vehicles may require the upper control arms to run with these spacers for proper clearance.