Durable track bar from Clayton

Rear adjustable track bar is constructed from DOM tubing. At both ends there are Giiro joints to help absorb road noise and vibrations for a smooth and comfortable ride. The Giiro joint is a dual durometer, self centering joint, that is maintenance free. The outside part of the bushing is softer, to isolate road noise and vibrations and allow the bushing to articulate. It has 13,3 degree of movement in each direction, or 26,6 degrees combined per bushing. What you don't get is cheap poly bushings, or squeeky heim joints. Only the best for your Jeep. This track bar can be used with our suspension lift kit, or any JL with 0-6" lift. OEM bolts are reused for a direct bolt in setup with no drilling is required.

Specs:

    1 3/8" X 5/16" DOM Tubing
    Exhaust clearance bend
    HD Girro joint bushing
    Lift 0-6"
    Made in the USA